Recently, I was fortunate to receive a new prototype model of the fan-aspirated MeteoShield Pro from Barani Design. On this version, the solar panels are replaced with two power wires, making it possible to connect an external power source, allowing the fan to be active 24 hours a day. Varying fan rpm is possible by…
Tag: ts-100
Apogee TS-100 first impressions
I was losing the last light and had to get a flash light while connecting the last wires Tuesday evening (August 17th), but I have the TS-100 up and running. Without battery backup for now. I will fix that later. Adding this new shield to my setup has triggered a whole series of new tests…
Project Apogee part 3: controlling the TS-100
In my previous post I addressed the power supply needed to run the Apogee Instruments TS-100 fan aspirated shield in my setup. The next step is building a controller for the fan that allows me to vary the fan speed and read the actual rpm being achieved. The idea is that the controller can query…
Project Apogee part 2: power supply
Project Apogee requires me to rethink the power supply of my weather station. When I start writing this, the Meteodrenthe weather station runs on solar power only. The Davis components have their own panel inside the transmitters. Other custom elements use 2 watt 6 volt panels by Voltaic Systems. This has been an ideal solution…
Project Apogee part 1: fan aspiration
My big project for the summer of 2021 is adding a fan aspirated radiation shield to my setup. My primary shield – the Barani MeteoShield Pro – is a superb product, but a passive shield it remains. It suffers from overheating in windless conditions. Those conditions do not occur too often at my location, but…